Standard and Custom Air and Hydraulic presses, designed and manufactured by Hill Engineering, provide exceptional accuracy and offer you greater flexibility for system design. We manufacture familiar 4 post designs, "Unitized" self-contained die/press units, as well as flying presses. Our ability to design and build rollforming die systems using the latest technology and electronic controls allows us to provide additional ways to solve your production problems.

HE Divider

Standard Air Press

In tonnage ranges of 3, 7, 12, 20, 30, 40 & 60        (Specials on Request)

Stroke Ranges 0-3"

Press include Four Post construction, Air Bladder, Ram Stops, Up Stops, Surge tank, Filter/Regulator, Ram Return Switch, Ram Return Springs, Non Interlocked Barrier Gurarding and Terminal box.

Optional Items to add:                               Press Rails (Top and Bottom).                        Air or Spring pull back with backstop and shock absorbers.                                                   Fixed or Two Way Adjustable Press Stand.  Electronic Packages for Open Loop, Closed. Loop, Pickup Fingers or Palm Buttons.

 
HE Divider

Standard Hydraulic Press for the Roll Forming and Stamping industries.

In press tonnage ranges of 5, 10, 20, 30 & 40

Standard stroke ranges from 1/2" to 3"

Optional electronic packages for automated or hand feed operations.

With the power of hydraulics, you get full tonnage through the full stroke of the cylinder.

This standard self contained press design  allows you to move the press for multiple applications or leave dedicated.

Need a different size or tonnage range, we specialize in custom hydraulics to fit your needs.

 

Hill Standard Hydraulic Press in 7, 12, 20 and 30 ton ranges

HE Divider

Flying Hydraulic Postpunching
and Cutoff System with electronic
measuring

System consists of two (2) postpunching
and one (1) cutoff press/die units all being
electronically tracked and fired to create any
pattern you require. This system has the optional download capabilities allowing you to send part information and quantities from your office directly to the controller. So no operator inputting is required. Optional label or part marking systems are available.

 

Flying Hydraulic Postpunching and Cutoff System with electronic measuring.
HE Divider

Standard self-contained Hydraulic
Press/Die Units

Shown is a slugless (crop) press/die ( also built are slug-type self-contained units).  These dies can stroke in as little as .25 seconds (total cycle time). With this window type design, multiple die inserts can be changeout faster than it would take to changeover your roll mill.

Self-Contained Hydraulic Press/Die Units.


Home

Contact Hill

New Products

Upcoming Shows


COPYRIGHT © 1997-2008  HILL ENGINEERING / Formtek Metal Forming All Rights Reserved
Web Site Design and Maintenance By

Hill Engineering